Cleaning your machine

The machine should be carefully cleaned after each use. After a relatively long period of inactivity, it should be cleaned before each use too.

Art/ 6.3.1 User Guide

For these blade cleaning operations, which are particularly specific and which may result in serious slicing risks, it is essential to wear cut resistant gloves. It is also preferable to replace the protective blade ring in a closed position (1).With a soft damp cloth placed on the blade, rub from in to out to remove any residue of grease and matter. Repeat this operation on both sides of the blade.

N.B: SLICING RISKS. USE CUT AND TEAR RESISTANT PROTECTIVE GLOVES AND PERFORM THE OPERATIONS WITH GREAT CARE.

• Remove the product recovery container;
• Loosen and then remove the knob (2) and lift the upper sliding plate (3) with the corresponding product press arm;
• Clean all dismantled parts, the body of the machine etc … using only warm water and a soft cloth, a spongy fabric
  or even a nylon brush to clean the parts of the tray and the product press.
• Wipe all parts again with a soft cloth.

N.B: DO NOT CLEAN THE MACHINE WITH A WATER PUMP OR STEAM OR OTHER SIMILAR METHODS.